|
3002
|
ERROR
|
Non-CUDA_SUCCESS code returned (<cuda_error_code>)
|
TUFLOW FV
|
|
3005
|
ERROR
|
Requested device <device_id> not found in available device list
|
TUFLOW FV
|
|
3018
|
ERROR
|
GPU memory allocation on device <device_id> failed with code <allocator_error_code>
|
TUFLOW FV
|
|
3999
|
ERROR
|
Internal FVC error while selecting hardware option (<hardware_option_value>)
|
TUFLOW FV
|
|
10000
|
ERROR
|
Memory allocation failure.
|
TUFLOW FV
|
|
10001
|
ERROR
|
Memory deallocation failure.
|
TUFLOW FV
|
|
10002
|
WARNING
|
Cloud cover not defined by the user. Clear skies assumed for radiation heat transfer model
|
TUFLOW FV
|
|
10003
|
ERROR
|
Heat should not be included if temperature is not simulated
|
TUFLOW FV
|
|
10004
|
ERROR
|
Long wave radiation heat transfer model requires long wave radiation defined by the user
|
TUFLOW FV
|
|
10005
|
ERROR
|
NaN detected in cell, <2d_cell_id>, layer, <layer_id>.
|
TUFLOW FV
|
|
10006
|
ERROR
|
Radiation heat transfer model requires air temperature and relative humidity defined by the user
|
TUFLOW FV
|
|
10007
|
ERROR
|
Sum of shortwave bed absorption coefficients must not be greater than 1.0.
|
TUFLOW FV
|
|
10008
|
WARNING
|
Wind speed not defined by the user. Wind velocity assumed to be null
|
TUFLOW FV
|
|
10009
|
ERROR
|
day_of_the_year requires tform == 1
|
TUFLOW FV
|
|
10010
|
ERROR
|
latent heat transfer model not recognised, needs to be 1 or 2
|
TUFLOW FV
|
|
10011
|
ERROR
|
latent heat transfer model requires air temperature and relative humidity defined by the user
|
TUFLOW FV
|
|
10012
|
ERROR
|
long wave radiation heat transfer model requires air temperature defined by the user
|
TUFLOW FV
|
|
10013
|
ERROR
|
long wave radiation model not recognised, needs to be 1 to 2
|
TUFLOW FV
|
|
10014
|
ERROR
|
short wave radiation heat transfer model requires incident short wave radiation defined by the user
|
TUFLOW FV
|
|
10015
|
ERROR
|
short wave radiation model not recognised, needs to be 1 or 2
|
TUFLOW FV
|
|
10016
|
ERROR
|
wind stress model not recognised, needs to be 1 to 3
|
TUFLOW FV
|
|
10017
|
WARNING
|
Boundary condition (bc_id=<bc_id>) is located outside model domain!
|
TUFLOW FV
|
|
10018
|
ERROR
|
Could not find a matching grid id/label
|
TUFLOW FV
|
|
10019
|
ERROR
|
Current timestep is not included in transport file.
|
TUFLOW FV
|
|
10020
|
ERROR
|
Error initialising external wave Model
|
TUFLOW FV
|
|
10021
|
ERROR
|
Error initialising external wave model grid
|
TUFLOW FV
|
|
10022
|
ERROR
|
Error processing vertical distribution file. NaN detected.
|
TUFLOW FV
|
|
10023
|
ERROR
|
Error while closing external wave model
|
TUFLOW FV
|
|
10024
|
WARNING
|
Moving BC (bc_id=<bc_id>) is currently outside model domain.
|
TUFLOW FV
|
|
10025
|
ERROR, WARNING
|
Model start or end time is outside of BC <bc_id> temporal extent.
|
TUFLOW FV
|
|
10026
|
ERROR
|
Must specify a bc update time for a wave_coupled bc.
|
TUFLOW FV
|
|
10027
|
ERROR
|
No point corresponding to ID, <point_id>, found in any GIS SA file.
|
TUFLOW FV
|
|
10028
|
ERROR
|
No polygon corresponding to ID, <polygon_id>, found in CSV file.
|
TUFLOW FV
|
|
10029
|
ERROR
|
No polygon corresponding to ID, <polygon_id>, found in any GIS SA file.
|
TUFLOW FV
|
|
10030
|
ERROR
|
OBC_GRID and SCALAR_GRID boundary conditions must be linked with a grid with boundary nodestrings mapped (use command “BOUNDARY GRIDMAP == 1”)
|
TUFLOW FV
|
|
10031
|
ERROR
|
Unexpected bc type
|
TUFLOW FV
|
|
10032
|
ERROR
|
Unexpected nodestring id <nodestring_id> in bc <bc_id>
|
TUFLOW FV
|
|
10033
|
ERROR
|
Unexpected subtype for flow boundary condition
|
TUFLOW FV
|
|
10034
|
ERROR
|
Unexpected temporal extrapolation type
|
TUFLOW FV
|
|
10035
|
ERROR
|
Unrecognised boundary condition type
|
TUFLOW FV
|
|
10036
|
ERROR
|
Unexpected temporal output return
|
TUFLOW FV
|
|
10037
|
ERROR
|
Wave_coupled bc is only compatible with ISOtime simulations.
|
TUFLOW FV
|
|
10038
|
ERROR
|
error executing wave timestep, check wave model log files
|
TUFLOW FV
|
|
10039
|
ERROR
|
<bc_header_entry> size is not compatible with <bc_header_entry> /or <bc_header_entry> dimensions.
|
TUFLOW FV
|
|
10040
|
ERROR
|
<bc_header_entry> size is not compatible with <bc_header_entry>, <bc_header_entry> /or <bc_header_entry> dimensions.
|
TUFLOW FV
|
|
10041
|
WARNING
|
<bc_data> variable is stationary (no time dimension)
|
TUFLOW FV
|
|
10042
|
ERROR
|
NaN detected in density field in cell <2d_cell_id>
|
TUFLOW FV
|
|
10043
|
ERROR
|
Unknown initial condition specification
|
TUFLOW FV
|
|
10044
|
ERROR
|
code block not yet implemented on GPU
|
TUFLOW FV
|
|
10045
|
ERROR
|
depth has gone negative at cell <2d_cell_id>
|
TUFLOW FV
|
|
10046
|
ERROR
|
error echoing cell geometry <internal_file_id>
|
TUFLOW FV
|
|
10047
|
ERROR
|
incompatible cell and mesh object sizes
|
TUFLOW FV
|
|
10048
|
ERROR
|
material group specified in control file is not consistent with geometry file
|
TUFLOW FV
|
|
10049
|
ERROR
|
number of material groups specified in cell object is not consistent with mesh object
|
TUFLOW FV
|
|
10050
|
ERROR
|
Imperial/US Customary/English Units are not yet supported for <model_feature>. Please use Units == Metric
|
TUFLOW FV
|
|
10051
|
ERROR
|
A sediment control file has been specified, but ‘Include Sediment == 0,0’
|
TUFLOW FV
|
|
10052
|
WARNING
|
Cell 3D Depth is below zero. It will not have any effect
|
TUFLOW FV
|
|
10053
|
WARNING
|
Could not determine number of sediment fractions (Nsed), or Nsed was outside allowable limits.
|
TUFLOW FV
|
|
10054
|
WARNING
|
Dry depth will never make dry cells
|
TUFLOW FV
|
|
10055
|
ERROR
|
End time MUST be specified.
|
TUFLOW FV
|
|
10056
|
ERROR
|
Error in water quality model
|
TUFLOW FV
|
|
10057
|
ERROR
|
Error in water quality model: <wq_error>
|
TUFLOW FV
|
|
10058
|
WARNING
|
It is recommended to use Sigma 3D vertical layering (not Z or Z-Sigma) when sediment morphologic update is enabled.
|
TUFLOW FV
|
|
10059
|
ERROR
|
Number of output statements is greater than maximum allowed, <max_outputs>.
|
TUFLOW FV
|
|
10060
|
ERROR
|
Number of sediment fractions (Nsed) is greater than maximum allowed (<max_sed_fractions>).
|
TUFLOW FV
|
|
10061
|
WARNING
|
Polygon file used for this BC/Structure, ignoring any READ GIS SA/ZN polygons
|
TUFLOW FV
|
|
10062
|
ERROR
|
Start time MUST be specified, even when using a restart file.
|
TUFLOW FV
|
|
10063
|
WARNING
|
TPC outputs disabled as GIS integration has not been enabled for this model.
|
TUFLOW FV
|
|
10064
|
ERROR
|
TUFLOW WQ Module requires simulation of heat. Exiting
|
TUFLOW FV
|
|
10065
|
ERROR
|
TUFLOW WQ Module requires simulation of salinity. Exiting
|
TUFLOW FV
|
|
10066
|
ERROR
|
TUFLOW WQ Module requires simulation of temperature. Exiting
|
TUFLOW FV
|
|
10067
|
WARNING
|
This is a 3D simulation and a constant viscosity/diffusivity vertical mixing model is being used. Should a more advanced mixing model have been specified?
|
TUFLOW FV
|
|
10068
|
ERROR
|
Unknown vertical coordinate type <vertical_coord_type>
|
TUFLOW FV
|
|
10069
|
WARNING
|
Wet depth is less than dry depth. Momentum will never be switched off
|
TUFLOW FV
|
|
10070
|
ERROR
|
“Blockage” definition error (<0.0), ID<culvert_id>
|
TUFLOW FV
|
|
10071
|
ERROR
|
“Blockage” definition error (>100.0), ID<culvert_id>
|
TUFLOW FV
|
|
10072
|
ERROR
|
“Height” definition error (<=0), ID<culvert_id>
|
TUFLOW FV
|
|
10073
|
WARNING
|
“Ignore” == 1, Culvert data not processed, ID<culvert_id>
|
TUFLOW FV
|
|
10074
|
ERROR
|
“Len_or_ANA” definition error (<=0), ID<culvert_id>
|
TUFLOW FV
|
|
10075
|
ERROR
|
“Number_of” definition error (<1.0), ID<culvert_id>
|
TUFLOW FV
|
|
10076
|
ERROR
|
“Width” definition error (<=0), ID<culvert_id>
|
TUFLOW FV
|
|
10077
|
ERROR
|
“n_or_n_F” definition error (<=0.0), ID<culvert_id>
|
TUFLOW FV
|
|
10078
|
ERROR
|
“n_or_n_F” is unusually high (>1.0), ID<culvert_id>
|
TUFLOW FV
|
|
10079
|
ERROR
|
Could not find specified ID in culvert file, ID<culvert_id>
|
TUFLOW FV
|
|
10080
|
ERROR, WARNING
|
Culvert downstream invert is less than ground elevation, ID <culvert_id>
|
TUFLOW FV
|
|
10081
|
ERROR, WARNING
|
Culvert upstream invert is less than ground elevation, ID <culvert_id>
|
TUFLOW FV
|
|
10082
|
WARNING
|
Culvert/s <culvert_id>’s width of <culvert_width> <units> exceeds nodestring length by <nodestring_length> <units>. Increase nodestring length to ensure adequate 1D/2D connection width.
|
TUFLOW FV
|
|
10083
|
ERROR
|
Irregular “Type” currently not supported (Type=4,6), ID<culvert_id>
|
TUFLOW FV
|
|
10084
|
WARNING
|
Nodestring ID <nodestring_id>’s length of <nodestring_length> <units> exceeds culvert/s width of <culvert_width> <units> by <excess_length> <units>. Check if nodestring/mesh can be modified to better match culvert width.
|
TUFLOW FV
|
|
10085
|
ERROR
|
Unrecognised “Type” (1<=val<=6), ID<culvert_id>
|
TUFLOW FV
|
|
10086
|
ERROR
|
Duplicate grid labels are not permitted.
|
TUFLOW FV
|
|
10087
|
ERROR
|
Error deconstructing water quality model: <wq_error>
|
TUFLOW FV
|
|
10088
|
ERROR
|
GPU Hardware target currently only supports up to <max_vertical_layers> vertical cell layers
|
TUFLOW FV
|
|
10089
|
ERROR
|
NaN value detected in cell <2d_cell_id>, conserved variable <conserved_variable>
|
TUFLOW FV
|
|
10090
|
ERROR
|
Provided coordinates are outside the region.
|
TUFLOW FV
|
|
10091
|
WARNING
|
Simulation has run beyond transport file limits
|
TUFLOW FV
|
|
10092
|
ERROR
|
Timestep has gone negative, possibly due to a negative cell dZ
|
TUFLOW FV
|
|
10093
|
ERROR
|
Velocity has exceeded stability limit <velocity_stability_limit> (m/s or ft/s) at 2D cell <2d_cell_id>
|
TUFLOW FV
|
|
10094
|
ERROR
|
Velocity has exceeded stability limit <velocity_stability_limit> (m/s or ft/s) at 2D cell <2d_cell_id> (3D cell <3d_cell_id> - vertical layer <layer_id>)
|
TUFLOW FV
|
|
10095
|
WARNING
|
Warning: Geometry netCDF file records mesh geometry in metric units
|
TUFLOW FV
|
|
10096
|
ERROR
|
Water surface and/or velocity magnitude has exceeded limits in 2D cell <2d_cell_id>
|
TUFLOW FV
|
|
10097
|
ERROR
|
Water surface has exceeded stability limit <water_surface_stability_limit> (mRL or ftRL) at 2D cell <2d_cell_id>
|
TUFLOW FV
|
|
10098
|
ERROR
|
Water surface is less than <fixed_zlayer_depth_tolerance>m above top zlayer at cell <2d_cell_id>
|
TUFLOW FV
|
|
10099
|
ERROR
|
invalid auto-termination flag
|
TUFLOW FV
|
|
10100
|
ERROR
|
unexpected mode specified
|
TUFLOW FV
|
|
10101
|
ERROR
|
Nodes <node_id> and <duplicate_node_id> are duplicates!
|
TUFLOW FV
|
|
10102
|
ERROR
|
Structure A-side and B-side flows are numerically inconsistent. Structure <structure>.
|
TUFLOW FV
|
|
10103
|
ERROR
|
error echoing internal face geometry <file_id>
|
TUFLOW FV
|
|
10104
|
ERROR
|
face mesh%face incompatible sizes
|
TUFLOW FV
|
|
10105
|
ERROR
|
one or more subroutine arguments not constructed
|
TUFLOW FV
|
|
10106
|
ERROR
|
Data is stored as 8 bit integers, repack as 16 bit
|
TUFLOW FV
|
|
10107
|
ERROR
|
Error in file: <file_name>, Line <line_number>
|
TUFLOW FV
|
|
10108
|
ERROR
|
File name has not been specified or is blank.
|
TUFLOW FV
|
|
10109
|
ERROR
|
Maximum number of open files exceeded
|
TUFLOW FV
|
|
10110
|
ERROR
|
Not enough vertices in TIN file
|
TUFLOW FV
|
|
10111
|
ERROR
|
Unsupported Zpts Grid file format
|
TUFLOW FV
|
|
10112
|
ERROR
|
fvopen argument combination not supported
|
TUFLOW FV
|
|
10113
|
WARNING
|
maximum number of characters allowed per line in csv file is <max_characters>
|
TUFLOW FV
|
|
10114
|
ERROR
|
triangle index error
|
TUFLOW FV
|
|
10115
|
ERROR
|
Bed layer (SIGMA=0.0) should not be explicitly specified in layer file
|
TUFLOW FV
|
|
10116
|
ERROR
|
Found overlapping boundary condition nodestrings
|
TUFLOW FV
|
|
10117
|
WARNING
|
Cartesian model specified with coordinates within range [-360.,360.], [-90.,90.]. Check if spherical coordinates should be specified.
|
TUFLOW FV
|
|
10118
|
ERROR
|
Distance of zero encountered on breakline, check for cooincident vertices
|
TUFLOW FV
|
|
10119
|
ERROR
|
Duplicate Polygon/Point id: <point_label> found in <file_name> files.
|
TUFLOW FV
|
|
10120
|
ERROR
|
Duplicate nodestring id: <nodestring_id> found in either 2dm or external nodestrings
|
TUFLOW FV
|
|
10121
|
ERROR
|
Duplicated nodestring ID in 2dm file: <nodestring_id_2dm_file>
|
TUFLOW FV
|
|
10122
|
WARNING
|
Elevation greater than 9999. encountered at cell <2d_cell_id>
|
TUFLOW FV
|
|
10123
|
WARNING
|
Elevation less than -9999. encountered at cell <2d_cell_id>
|
TUFLOW FV
|
|
10124
|
ERROR
|
Entire mesh has been set inactive. Check material types
|
TUFLOW FV
|
|
10125
|
ERROR
|
Error echoing spatial geometry log file
|
TUFLOW FV
|
|
10126
|
ERROR
|
Fixed Grid Cellsize has not been specified
|
TUFLOW FV
|
|
10127
|
ERROR
|
Fixed Grid Gridsize has not been specified
|
TUFLOW FV
|
|
10128
|
WARNING
|
Nodestring overlap found between Nodestring ID=<nodestring_id_1> and Nodestring ID=<nodestring_id_2>.
|
TUFLOW FV
|
|
10129
|
WARNING
|
Found <2d_cell_count> cell-centroids along polyline
|
TUFLOW FV
|
|
10130
|
WARNING
|
Found <2d_cell_count> cell-centroids in polygon
|
TUFLOW FV
|
|
10131
|
WARNING
|
Found <2d_cell_count> cell-vertexes in polygon
|
TUFLOW FV
|
|
10132
|
ERROR
|
GIS SA point input error
|
TUFLOW FV
|
|
10133
|
ERROR
|
Inactive material block specification, ID <material_id> is not supported with external material layers.
|
TUFLOW FV
|
|
10134
|
ERROR
|
Input arguments have not been constructed
|
TUFLOW FV
|
|
10135
|
ERROR
|
Linear elements only expected
|
TUFLOW FV
|
|
10136
|
ERROR
|
Negative area calculated for cell <2d_cell_id>
|
TUFLOW FV
|
|
10137
|
WARNING
|
No points found in elevation polygon!
|
TUFLOW FV
|
|
10138
|
WARNING
|
No points found in elevation polyline!
|
TUFLOW FV
|
|
10139
|
WARNING
|
No points found in material polygon!
|
TUFLOW FV
|
|
10140
|
ERROR
|
Nodestring <nodestring_id>, segment <segment_number> does not correspond to any model face.
|
TUFLOW FV
|
|
10141
|
ERROR
|
Number of breakline points exceeds maximum
|
TUFLOW FV
|
|
10142
|
ERROR
|
Number of nodestrings must be less than or equal to <max_nodestrings>
|
TUFLOW FV
|
|
10143
|
ERROR
|
Number of requested nodestrings is greater than upper limit (<max_nodestrings>).
|
TUFLOW FV
|
|
10144
|
ERROR
|
Out-of-range latitude [-90.,90.] encountered at node:<node_id>
|
TUFLOW FV
|
|
10145
|
ERROR
|
Out-of-range longitude [-360.,360.] encountered at node:<node_id>
|
TUFLOW FV
|
|
10146
|
WARNING
|
Point <point_id> (<x_coordinate>, <y_coordinate>) is not located within model domain.
|
TUFLOW FV
|
|
10147
|
ERROR
|
SIGMA column must be monotonically decreasing
|
TUFLOW FV
|
|
10148
|
ERROR
|
SIGMA values must be between 0.0 and 1.0
|
TUFLOW FV
|
|
10149
|
ERROR
|
Some nodestrings have failed to be built. See previous ERROR messages.
|
TUFLOW FV
|
|
10150
|
ERROR
|
Surface layer (SIGMA=1.0) should not be explicitly specified in layer file
|
TUFLOW FV
|
|
10151
|
WARNING
|
Unexpected id encountered. Cell id = <2d_cell_id>
|
TUFLOW FV
|
|
10152
|
ERROR
|
Unexpected nodestring id
|
TUFLOW FV
|
|
10153
|
ERROR
|
Z column must be monotonically decreasing
|
TUFLOW FV
|
|
10154
|
ERROR
|
ZLine Point not snapped to end of line
|
TUFLOW FV
|
|
10155
|
ERROR
|
ZLine Point not snapped to start of line
|
TUFLOW FV
|
|
10156
|
ERROR
|
failed to find path
|
TUFLOW FV
|
|
10157
|
ERROR
|
overlapping elements detected: <mesh_2dm_cell_ids>
|
TUFLOW FV
|
|
10158
|
WARNING
|
Unable to solve for specified inflow conditions at bc <bc_id>
|
TUFLOW FV
|
|
10159
|
ERROR
|
Duplicated GIS point id <point_id>, in layer <2d_sa_layer>
|
TUFLOW FV
|
|
10160
|
ERROR
|
Duplicated GIS polygon id <polygon_id>, in layer <2d_sa_layer>
|
TUFLOW FV
|
|
10161
|
ERROR
|
Duplicated nodestring id <nodestring_id>, in layer <2d_ns_layer>
|
TUFLOW FV
|
|
10162
|
ERROR
|
For GIS inputs either the MI PROJECTION (for mif) or SHP PROJECTION (for shp) must be specified.
|
TUFLOW FV
|
|
10163
|
ERROR
|
GIS PO points should have either 3 or 5 attributes
|
TUFLOW FV
|
|
10164
|
ERROR
|
Inactive material block specification, ID <material_id> is not supported with external GIS material layers.
|
TUFLOW FV
|
|
10165
|
ERROR
|
Less than required 2 2d_ns attributes
|
TUFLOW FV
|
|
10166
|
ERROR
|
Material ID <material_id> using SET MAT == not specified in control file.
|
TUFLOW FV
|
|
10167
|
ERROR
|
Material <material_id> within GIS layer not specified in control file.
|
TUFLOW FV
|
|
10168
|
WARNING
|
Object in GIS polygon is not a point, skipping.
|
TUFLOW FV
|
|
10169
|
WARNING
|
Object in GIS polygon is not a region or a point, skipping.
|
TUFLOW FV
|
|
10170
|
WARNING
|
Object in materials polygon is not a region, skipping.
|
TUFLOW FV
|
|
10171
|
WARNING
|
Object in nodestring gis file is not a line or polyline, skipping.
|
TUFLOW FV
|
|
10172
|
ERROR
|
Please use command: ’MATERIAL POLYGON FILE == for CSV file formats. File: <material_csv>
|
TUFLOW FV
|
|
10173
|
ERROR
|
UNSUPPORTED FILE FORMAT FOR MATERIALS: <material_file>
|
TUFLOW FV
|
|
10174
|
WARNING
|
Unnamed polygon/point found in GIS SA layer:<2d_sa_layer>.
|
TUFLOW FV
|
|
10175
|
ERROR
|
Duplicate BC event source found: <bc_event_text> | <bc_event_name>
|
TUFLOW FV
|
|
10176
|
ERROR
|
Exceeded maximum number of allowed active BC event sources (<max_user_variables>)
|
TUFLOW FV
|
|
10177
|
ERROR
|
Exceeded maximum number of allowed user variables (<max_user_variables>)
|
TUFLOW FV
|
|
10178
|
ERROR
|
More than the maximum number of scalar constituents (<max_scalar_constituents>) have been requested.
|
TUFLOW FV
|
|
10179
|
ERROR
|
Variable defined more than once: <max_user_variable_name>
|
TUFLOW FV
|
|
10180
|
ERROR
|
Error processing netcdf grid coordinate variables
|
TUFLOW FV
|
|
10181
|
ERROR
|
NaN detected in grid horizontal coordinates
|
TUFLOW FV
|
|
10182
|
ERROR
|
NaN detected in grid vertical coordinates
|
TUFLOW FV
|
|
10183
|
ERROR
|
Specified TIN is not coincident with model mesh.
|
TUFLOW FV
|
|
10184
|
ERROR
|
Specified grid is not coincident with model mesh.
|
TUFLOW FV
|
|
10185
|
WARNING
|
Specified grid is not coincident with scatter point set.
|
TUFLOW FV
|
|
10186
|
ERROR
|
unexpected grid type
|
TUFLOW FV
|
|
10187
|
WARNING
|
Partial TIN coverage: <2d_cell_count> model cells (<perc_total_2d_cells> %) fall within TIN extent.
|
TUFLOW FV
|
|
10188
|
WARNING
|
Partial grid coverage: <2d_cell_count> model cells (<perc_total_2d_cells> %) fall within grid extent.
|
TUFLOW FV
|
|
10189
|
WARNING
|
Partial grid coverage: <2d_node_count> model nodes (<perc_total_2d_nodes> %) fall within grid extent.
|
TUFLOW FV
|
|
10190
|
ERROR
|
<node_count> unused .2dm nodes found - remove disjoint nodes in mesh.
|
TUFLOW FV
|
|
10191
|
WARNING
|
Partial grid coverage: <number_scatter_points> scatter points (<perc_total_scatter_points> %) fall within grid extent.
|
TUFLOW FV
|
|
10192
|
ERROR
|
Incorrect cell ID specified, <2d_cell_id>.
|
TUFLOW FV
|
|
10193
|
ERROR
|
NaN detected in OGCM initial conditions
|
TUFLOW FV
|
|
10194
|
ERROR
|
NaN detected in global salinity initial conditions
|
TUFLOW FV
|
|
10195
|
ERROR
|
NaN detected in global scalar profile initial conditions
|
TUFLOW FV
|
|
10196
|
ERROR
|
NaN detected in global sediment concentration initial conditions
|
TUFLOW FV
|
|
10197
|
ERROR
|
NaN detected in global temperature initial conditions
|
TUFLOW FV
|
|
10198
|
ERROR
|
NaN detected in global tracer concentration initial conditions
|
TUFLOW FV
|
|
10199
|
ERROR
|
NaN detected in global wq concentration initial conditions
|
TUFLOW FV
|
|
10200
|
ERROR
|
Could not create directory: <directory>
|
TUFLOW FV
|
|
10201
|
ERROR
|
Could not find directory: <directory>
|
TUFLOW FV
|
|
10202
|
ERROR
|
Error closing file: <file_name>
|
TUFLOW FV
|
|
10203
|
ERROR
|
Error encountered closing file unit <file_id>
|
TUFLOW FV
|
|
10204
|
ERROR, WARNING
|
Error invoking <netcdf_command>. Netcdf status value is <netcdf_status_code>. <netcdf_error_message>.
|
TUFLOW FV
|
|
10205
|
ERROR
|
Error reading csv file <file_name>
|
TUFLOW FV
|
|
10206
|
ERROR
|
Error reading line <line_number>
|
TUFLOW FV
|
|
10207
|
ERROR
|
Error reading restart file
|
TUFLOW FV
|
|
10208
|
ERROR
|
Error writing restart file
|
TUFLOW FV
|
|
10209
|
ERROR
|
Log directory does not exist: <log_directory>
|
TUFLOW FV
|
|
10210
|
WARNING
|
Restart file configuration mismatch
|
TUFLOW FV
|
|
10211
|
ERROR
|
Restart file time validation error
|
TUFLOW FV
|
|
10212
|
ERROR, WARNING
|
Unable to open file: <file_name>
|
TUFLOW FV
|
|
10213
|
WARNING
|
Unable to open restart file
|
TUFLOW FV
|
|
10214
|
ERROR
|
XMDF write error
|
TUFLOW FV
|
|
10215
|
ERROR
|
error closing log file
|
TUFLOW FV
|
|
10216
|
ERROR
|
error opening log file, <log_file_name>
|
TUFLOW FV
|
|
10217
|
ERROR
|
error opening structural log file, <structure_logging_file>
|
TUFLOW FV
|
|
10218
|
ERROR
|
error reading csv file
|
TUFLOW FV
|
|
10219
|
ERROR
|
error reading file
|
TUFLOW FV
|
|
10220
|
ERROR
|
error writing cell debug info
|
TUFLOW FV
|
|
10221
|
ERROR
|
error writing cfl information <cfl_file_name>
|
TUFLOW FV
|
|
10222
|
ERROR
|
error writing debug file
|
TUFLOW FV
|
|
10223
|
ERROR
|
error writing face debug info
|
TUFLOW FV
|
|
10224
|
ERROR
|
error writing node debug info
|
TUFLOW FV
|
|
10225
|
ERROR
|
error writing to file unit<file_id>
|
TUFLOW FV
|
|
10226
|
ERROR
|
error writing to log file
|
TUFLOW FV
|
|
10227
|
ERROR
|
error writing to structure log file
|
TUFLOW FV
|
|
10228
|
ERROR
|
file reading error
|
TUFLOW FV
|
|
10229
|
ERROR
|
incompatible number of layer faces in turbulence restart file
|
TUFLOW FV
|
|
10230
|
ERROR
|
restart file incompatible with geometry file
|
TUFLOW FV
|
|
10231
|
ERROR
|
rewind file failed
|
TUFLOW FV
|
|
10232
|
ERROR
|
Could not find suitable licensed dongle/s.
|
TUFLOW FV
|
|
10233
|
ERROR
|
Requested TUFLOW FV engine license not found.
|
TUFLOW FV
|
|
10234
|
ERROR
|
Requested module license not found on available dongle/s.
|
TUFLOW FV
|
|
10235
|
ERROR
|
Requested threads licenses not found on available dongle/s.
|
TUFLOW FV
|
|
10236
|
ERROR
|
SMS Licensing has not been enabled in this executable version.
|
TUFLOW FV
|
|
10237
|
ERROR
|
SORRY - Simulation time using a free licence has exceeded time limit.
|
TUFLOW FV
|
|
10238
|
ERROR
|
This does not appear to be a tutorial model. Set “tutorial model == off” to run this simulation (will require a valid license).
|
TUFLOW FV
|
|
10239
|
ERROR
|
Could not make Log directory: <log_directory>
|
TUFLOW FV
|
|
10240
|
WARNING
|
Very large angle encountered at cell <2d_cell_id>
|
TUFLOW FV
|
|
10241
|
WARNING
|
Very small angle encountered at cell <2d_cell_id>
|
TUFLOW FV
|
|
10242
|
WARNING
|
Very small edge length encountered at cell <2d_cell_id>
|
TUFLOW FV
|
|
10243
|
WARNING
|
3d output is not supported by SMS binary dat file. Requested output will be 2D depth-averaged.
|
TUFLOW FV
|
|
10244
|
WARNING
|
3d output is not supported by csv points file. Requested output will be 2D depth-averaged.
|
TUFLOW FV
|
|
10245
|
ERROR
|
Curtain polyline does not intersect mesh.
|
TUFLOW FV
|
|
10246
|
ERROR
|
DAT file output does not support <output_parameter>
|
TUFLOW FV
|
|
10247
|
ERROR
|
Duplicate PO id: <duplicate_po_id> found in GIS files.
|
TUFLOW FV
|
|
10248
|
ERROR
|
Error echoing spatial output log file
|
TUFLOW FV
|
|
10249
|
ERROR
|
Error processing output curtain object. Inadmissable cell index.
|
TUFLOW FV
|
|
10250
|
ERROR
|
Error processing output curtain object. NaN detected in curtain coordinates.
|
TUFLOW FV
|
|
10251
|
ERROR
|
MMM units system not supported for mass balance outputs. Exiting.
|
TUFLOW FV
|
|
10252
|
ERROR
|
Multiple mass balance output blocks specified. Exiting.
|
TUFLOW FV
|
|
10253
|
ERROR
|
Output interval must be higher than the maximum allowed timestep.
|
TUFLOW FV
|
|
10254
|
ERROR
|
Output parameter ‘<output_parameter>’ is not supported by the SMS DAT format.
|
TUFLOW FV
|
|
10255
|
ERROR
|
Output parameter ‘<output_parameter>’ is not supported by the XMDF format.
|
TUFLOW FV
|
|
10256
|
WARNING
|
Output point <point_label> is outside model domain.
|
TUFLOW FV
|
|
10257
|
ERROR
|
Simulation of internal nutrients not supported for mass balance outputs. Exiting.
|
TUFLOW FV
|
|
10258
|
ERROR
|
Statistics not supported for mass balance outputs. Exiting.
|
TUFLOW FV
|
|
10259
|
ERROR
|
Unexpected curtain id
|
TUFLOW FV
|
|
10260
|
ERROR
|
Unknown output parameter type ‘<output_parameter>’ encountered in output request <output_number>
|
TUFLOW FV
|
|
10261
|
ERROR
|
Unknown output statistic type, <output_statistic> encountered in output request <output_number>
|
TUFLOW FV
|
|
10262
|
ERROR
|
Unrecognised output type to convert units: <output_type>
|
TUFLOW FV
|
|
10263
|
ERROR
|
Unrecognised variable to convert <mass_output> output units: <mass_output_variable>
|
TUFLOW FV
|
|
10264
|
ERROR
|
XMDF output is not supported in this build.
|
TUFLOW FV
|
|
10265
|
ERROR
|
unknown output type
|
TUFLOW FV
|
|
10266
|
ERROR
|
unknown parameter type
|
TUFLOW FV
|
|
10267
|
WARNING
|
Could not find header type NODATA_VALUE or NODATA. Set to -99999 as default
|
TUFLOW FV
|
|
10268
|
ERROR
|
Expecting to find OGCM bc specified
|
TUFLOW FV
|
|
10269
|
ERROR
|
Expecting variable name, <variable_name>
|
TUFLOW FV
|
|
10270
|
ERROR
|
No variable name specified on line <line_number> - “<line_text>”
|
TUFLOW FV
|
|
10271
|
ERROR
|
No variable value specified on line <line_number> - “<line_text>”
|
TUFLOW FV
|
|
10272
|
ERROR
|
Output dataset is not compatible with SMS dat file type.
|
TUFLOW FV
|
|
10273
|
ERROR
|
UNABLE TO DETERMINE FILE FORMAT: <file_name>
|
TUFLOW FV
|
|
10274
|
ERROR
|
Unable to find coordinate variable name in netcdf file
|
TUFLOW FV
|
|
10275
|
ERROR
|
Unexpected line encountered in file: <line_text>, Line <line_number>
|
TUFLOW FV
|
|
10276
|
ERROR
|
netcdf file variables and grid dimensions are not compatible
|
TUFLOW FV
|
|
10277
|
ERROR
|
transport file dimensions are not compatible
|
TUFLOW FV
|
|
10278
|
ERROR
|
unexpected format request
|
TUFLOW FV
|
|
10279
|
ERROR
|
<column_name> column not found in csv file.
|
TUFLOW FV
|
|
10280
|
WARNING
|
<column_name> column not found in csv file. Assigning a value of: <default_value>
|
TUFLOW FV
|
|
10281
|
ERROR
|
<event_name> not found in Event File
|
TUFLOW FV
|
|
10282
|
ERROR
|
<data_variable> variable not found in netcdf file.
|
TUFLOW FV
|
|
10283
|
WARNING
|
<data_variable> variable not found in netcdf file. Assigning a <default_value> value.
|
TUFLOW FV
|
|
10284
|
ERROR
|
Cannot start IF block with “<logic_statement>”. Line no: <line_number> : “<line_text>”
|
TUFLOW FV
|
|
10285
|
ERROR
|
Cannot use “DEFINE EVENT” inside another “DEFINE EVENT” block. Line no: <line_number> : “<line_text>”
|
TUFLOW FV
|
|
10286
|
ERROR
|
Cannot use “<log_directory>” after an “ELSE” statement. Line no: <line_number> : “<line_text>”
|
TUFLOW FV
|
|
10287
|
ERROR
|
Number of include file nests is greater than maximum allowed, <max_include_nests>.
|
TUFLOW FV
|
|
10288
|
ERROR
|
Unbalanced “DEFINE EVENT”/“END DEFINE” count. Line no: <line_number> : “<line_text>”
|
TUFLOW FV
|
|
10289
|
ERROR
|
Unbalanced “IF”/“END IF” count. Line no: <line_number> : “<line_text>”
|
TUFLOW FV
|
|
10290
|
ERROR
|
<error_message> on line <line_number> - “<line_text>”
|
TUFLOW FV
|
|
10291
|
ERROR
|
Duplicate scenario number: <scenario_key> <scenario_value_1>, <scenario_key> <scenario_value_2>
|
TUFLOW FV
|
|
10292
|
ERROR
|
Exceeded allowed maximum number of scenario groups (<max_scenarios>). Line Number: <line_number> - “<line_text>”
|
TUFLOW FV
|
|
10293
|
ERROR
|
Exceeded allowed maximum scenarios number (<scenario_key><max_scenarios>~) in FVC name
|
TUFLOW FV
|
|
10294
|
ERROR
|
Missing a “~” after scenario placeholder in FVC name
|
TUFLOW FV
|
|
10295
|
ERROR
|
Missing a “~” after scenario/event placeholder in FVC name
|
TUFLOW FV
|
|
10296
|
ERROR
|
Missing scenario value for S<scenario_number>. Maximum scenario number: S<total_scenarios>
|
TUFLOW FV
|
|
10297
|
ERROR
|
Unable to parse scenario number as integer: <scenario_number>
|
TUFLOW FV
|
|
10298
|
ERROR
|
Require at least <min_required_scenarios> scenarios to be specified to fill <scenario_wildcard> placeholders in FVC name
|
TUFLOW FV
|
|
10299
|
ERROR
|
Scenario must use a number between <scenario_lower_bound>1 to <scenario_upper_bound><max_scenarios>: <scenario_key>
|
TUFLOW FV
|
|
10300
|
ERROR
|
Scenario name is blank. Line Number: <line_number> - “<line_text>”
|
TUFLOW FV
|
|
10301
|
ERROR
|
A valid trigger value must be specified.
|
TUFLOW FV
|
|
10302
|
ERROR
|
Airflow_Bubbler control parameter must be used for bubbler destratification unit
|
TUFLOW FV
|
|
10303
|
ERROR
|
Airflow_Compressor control parameter must be used for compressor destratification unit
|
TUFLOW FV
|
|
10304
|
WARNING
|
Assigned air flow rate property is set to <variable_name>.
|
TUFLOW FV
|
|
10305
|
ERROR
|
Bubbler destratification unit is only supported with the 3D module.
|
TUFLOW FV
|
|
10306
|
ERROR
|
Bubbler destratification unit requires the selected 2D cell (<2d_cell_id>) to have more than one layer.
|
TUFLOW FV
|
|
10307
|
ERROR
|
Bubbler elevation is outside water column bounds.
|
TUFLOW FV
|
|
10308
|
ERROR
|
Bubbler properties have not been correctly specified.
|
TUFLOW FV
|
|
10309
|
ERROR
|
Cell index <cell_id> is invalid: exceeds cell count (<max_cell_id>)
|
TUFLOW FV
|
|
10310
|
ERROR
|
Compression properties have not been correctly specified.
|
TUFLOW FV
|
|
10311
|
ERROR
|
Control type SAMPLE does not support multiple controls yet.
|
TUFLOW FV
|
|
10312
|
ERROR
|
Control type SAMPLE_RULE does not support multiple controls yet.
|
TUFLOW FV
|
|
10313
|
ERROR
|
Control type TRIGGER does not support multiple controls yet.
|
TUFLOW FV
|
|
10314
|
ERROR
|
Crest elevation property has not been set
|
TUFLOW FV
|
|
10315
|
ERROR
|
Crest length property has not been set
|
TUFLOW FV
|
|
10316
|
ERROR
|
Duplicated control parameter is detected: <control_parameter>
|
TUFLOW FV
|
|
10317
|
ERROR
|
Error echoing spatial structure log file
|
TUFLOW FV
|
|
10318
|
ERROR
|
Error processing sampling coordinates for structure
|
TUFLOW FV
|
|
10319
|
ERROR
|
Failed mass conservation check in destratification routine.
|
TUFLOW FV
|
|
10320
|
ERROR
|
Flux function must be specified for linked zone structures. The default NLSWE flux function is not applicable.
|
TUFLOW FV
|
|
10321
|
ERROR
|
Gate opening height has not been set
|
TUFLOW FV
|
|
10322
|
ERROR
|
NS or ZN component must be constructed prior to FLUX component
|
TUFLOW FV
|
|
10323
|
ERROR
|
No polygon corresponding to ID, <polygon_id>, found in file.
|
TUFLOW FV
|
|
10324
|
ERROR
|
No zone corresponding to ID, <zone_id>, found in any GIS ZN file.
|
TUFLOW FV
|
|
10325
|
ERROR
|
Nodestring side must be specified as ‘A’ or ‘B’.
|
TUFLOW FV
|
|
10326
|
ERROR
|
Number of control headers exceeds the number of control parameters.
|
TUFLOW FV
|
|
10327
|
ERROR
|
Number of control parameters exceeds <max_control_parameters>.
|
TUFLOW FV
|
|
10328
|
ERROR
|
Only a single cell is supported for bubbler destratification unit: <2d_cell_count> cells were assigned
|
TUFLOW FV
|
|
10329
|
ERROR
|
Porous structure flowpath length has not been specified
|
TUFLOW FV
|
|
10330
|
ERROR
|
Porous structure hydraulic conductivity has not been specified
|
TUFLOW FV
|
|
10331
|
ERROR
|
Radial_gate_weir_dz flux function is not applicable to linked nodestring or linked zone structures.
|
TUFLOW FV
|
|
10332
|
ERROR
|
SAMPLE_VALUE column must be monotonically increasing
|
TUFLOW FV
|
|
10333
|
ERROR
|
Sample point for structure is outside model domain.
|
TUFLOW FV
|
|
10334
|
ERROR
|
Sampling time has not been set for structure control
|
TUFLOW FV
|
|
10335
|
ERROR
|
Structure ‘zone’ component must be constructed.
|
TUFLOW FV
|
|
10336
|
WARNING
|
Structure control logic is not defined, set to type NONE
|
TUFLOW FV
|
|
10337
|
ERROR
|
Structure control logic is not recognised: <control_logic>
|
TUFLOW FV
|
|
10338
|
ERROR
|
Structure control parameter is not recognised: <control_parameter>
|
TUFLOW FV
|
|
10339
|
ERROR
|
Structure control parameter must be specified.
|
TUFLOW FV
|
|
10340
|
ERROR
|
Structure max open width MUST be defined for linked zone structure type.
|
TUFLOW FV
|
|
10341
|
ERROR
|
TARGET_DEFICIT column must be monotonically increasing
|
TUFLOW FV
|
|
10342
|
ERROR
|
TIME column must be monotonically increasing
|
TUFLOW FV
|
|
10343
|
ERROR
|
Unable to read cell id
|
TUFLOW FV
|
|
10344
|
ERROR
|
Unexpected structure nodestring id, <nodestring_id>.
|
TUFLOW FV
|
|
10345
|
ERROR
|
Unknown sample parameter.
|
TUFLOW FV
|
|
10346
|
ERROR
|
Unrecognised destratification unit type
|
TUFLOW FV
|
|
10347
|
ERROR
|
Unrecognised flux function specification
|
TUFLOW FV
|
|
10348
|
ERROR
|
Unrecognised structural control specification
|
TUFLOW FV
|
|
10349
|
ERROR
|
Unrecognised structure energy loss specification
|
TUFLOW FV
|
|
10350
|
ERROR
|
Unrecognised structure type
|
TUFLOW FV
|
|
10351
|
ERROR
|
User-specified structure width is not applicable for single nodestring structure types.
|
TUFLOW FV
|
|
10352
|
ERROR
|
Wall flux function is not applicable to linked nodestring or linked zone structures.
|
TUFLOW FV
|
|
10353
|
ERROR
|
Weir crest elevation property has not been set
|
TUFLOW FV
|
|
10354
|
ERROR
|
Weir elevation property has not been set
|
TUFLOW FV
|
|
10355
|
ERROR
|
Weir flux function is not applicable to linked nodestring or linked zone structures.
|
TUFLOW FV
|
|
10356
|
ERROR
|
Zone ID, <zone_id>has fewer than 3 vertices.
|
TUFLOW FV
|
|
10357
|
ERROR
|
Zone inlet/outlet orientation must be set for linked zone structure type.
|
TUFLOW FV
|
|
10358
|
ERROR
|
downstream water levels for structure matrix not in ascending order
|
TUFLOW FV
|
|
10359
|
ERROR
|
upstream water levels for structure matrix not in ascending order
|
TUFLOW FV
|
|
10360
|
ERROR
|
<sample_parameter> not included in simulation.
|
TUFLOW FV
|
|
10361
|
ERROR
|
<sample_parameter> requires salinity, temperature and DO to be included in simulation.
|
TUFLOW FV
|
|
10362
|
ERROR
|
Could not make directory: <tpc_directory>
|
TUFLOW FV
|
|
10363
|
ERROR
|
NaN returned from external turbulence module
|
TUFLOW FV
|
|
10364
|
ERROR
|
NaN returned from internal turbulence module
|
TUFLOW FV
|
|
10365
|
ERROR
|
Generic turbulence model parameter not set
|
TUFLOW FV
|
|
10366
|
ERROR
|
User defined second order turbulence parameters group not set.
|
TUFLOW FV
|
|
10367
|
ERROR
|
Error in reading -pu option
|
TUFLOW FV
|
|
10368
|
ERROR
|
Missing value after scenario argument: <scenario_number>
|
TUFLOW FV
|
|
10369
|
ERROR
|
Unknown option, <command_line_argument>
|
TUFLOW FV
|
|
10370
|
ERROR
|
argument to -pu option cannot be negative
|
TUFLOW FV
|
|
10371
|
ERROR
|
User defined second order turbulence parameters not supported yet.
|
TUFLOW FV
|
|
10372
|
ERROR
|
NSTACK too small
|
TUFLOW FV
|
|
10373
|
WARNING
|
bilinear interpolation weights calculation didn’t converge
|
TUFLOW FV
|
|
10374
|
ERROR
|
error calculating bilinear interpolation weights
|
TUFLOW FV
|
|
10375
|
ERROR
|
input arguments array index not same size
|
TUFLOW FV
|
|
10376
|
ERROR
|
singular matrix in ludcmp
|
TUFLOW FV
|
|
10377
|
ERROR
|
xvi and yvi must be same size
|
TUFLOW FV
|
|
10378
|
ERROR
|
“BC Event Source” must include two values separated by “|”
|
TUFLOW FV
|
|
10379
|
ERROR
|
Events specified but Event File not found
|
TUFLOW FV
|
|
10380
|
ERROR
|
<debug_message>
|
TUFLOW FV
|
|
10381
|
ERROR
|
<user_defined_message>
|
TUFLOW FV
|
|
10382
|
ERROR
|
XMDF and NetCDF map outputs are incompatible - please choose either XMDF or NetCDF
|
TUFLOW FV
|
|
10383
|
ERROR
|
Could not read projection line in .prj file.
|
TUFLOW FV
|
|
10384
|
ERROR
|
CoordSys line could not be found in “MI Projection” .mif file.
|
TUFLOW FV
|
|
10385
|
WARNING
|
Issue setting console title. Please contact support@tuflow.com
|
TUFLOW FV
|
|
10386
|
ERROR
|
No GPU devices found, enabled or compatible
|
TUFLOW FV
|
|
10387
|
WARNING
|
Number of conserved variables in restart file does not match current model configuration
|
TUFLOW FV
|
|
10388
|
WARNING
|
ZLine Point not snapped to Line - ignoring
|
TUFLOW FV
|
|
10389
|
WARNING
|
External GIS nodestring has failed to build successfully.
|
TUFLOW FV
|
|
10390
|
ERROR
|
Error reading input file
|
TUFLOW FV
|
|
10999
|
ERROR
|
Unexpected error encountered. Contact support@tuflow.com
|
TUFLOW FV
|
|
11000
|
ERROR
|
Error processing material group specification.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11001
|
ERROR
|
Material ID <material_id> is not specified in control file.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11002
|
ERROR
|
Maximum allowable bed thickness limit (100.0 m) is exceeded at cell <2d_cell_id>
|
TUFLOW FV, TUFLOW FV - STM
|
|
11003
|
ERROR
|
SED control file must first be read in order to activate module.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11004
|
ERROR
|
VanRijn04 external model must be enabled in order to provide variable inputs into VanRijn04 bedrough/bedshear/settling/erosion/bedload model/s
|
TUFLOW FV, TUFLOW FV - STM
|
|
11005
|
ERROR
|
floating point error returned by bed mass update
|
TUFLOW FV, TUFLOW FV - STM
|
|
11006
|
ERROR
|
floating point error returned by bedload model at cell <2d_cell_id>
|
TUFLOW FV, TUFLOW FV - STM
|
|
11007
|
ERROR
|
floating point error returned by erosion model at cell <2d_cell_id>
|
TUFLOW FV, TUFLOW FV - STM
|
|
11008
|
ERROR
|
floating point error returned by settling model at cell<2d_cell_id>, layer <layer_id>
|
TUFLOW FV, TUFLOW FV - STM
|
|
11009
|
ERROR
|
incompatible number of sediment fractions in restart file
|
TUFLOW FV, TUFLOW FV - STM
|
|
11010
|
ERROR
|
restart file incompatible with sediment control file
|
TUFLOW FV, TUFLOW FV - STM
|
|
11011
|
ERROR
|
van Rijn 04 external model requires that sediment fraction particle sizes are sorted from smallest to largest
|
TUFLOW FV, TUFLOW FV - STM
|
|
11012
|
ERROR
|
“External” model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11013
|
ERROR
|
Bed roughness model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11014
|
ERROR
|
Bed slumping model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11015
|
ERROR
|
Bedload model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11016
|
ERROR
|
Bedshear model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11017
|
ERROR
|
Consolidation model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11018
|
ERROR
|
Critical stress model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11019
|
WARNING
|
Depending on group model selection sediment grain density may need to be set.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11020
|
WARNING
|
Depending on group model selection, d50 parameter may need to be set.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11021
|
ERROR
|
Deposition model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11022
|
ERROR
|
Erosion model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11023
|
ERROR
|
Incorrect sediment fraction name specification, “<sediment_fraction_name>”.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11024
|
WARNING
|
No default material has been specified.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11025
|
ERROR
|
Number of sediment layers is greater than maximum allowed, <max_bed_sediment_layers>.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11026
|
ERROR
|
Profile model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11027
|
ERROR
|
Settling model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - STM
|
|
11028
|
ERROR
|
Error reading input file
|
TUFLOW FV, TUFLOW FV - STM
|
|
12000
|
ERROR
|
Error constructing water quality model: <wq_model>
|
TUFLOW FV, TUFLOW FV - WQ
|
|
12001
|
ERROR
|
Error executing water quality model update.
|
TUFLOW FV, TUFLOW FV - WQ
|
|
12002
|
ERROR
|
Error initialising interfacing between wq model and ptm.
|
TUFLOW FV, TUFLOW FV - WQ
|
|
12003
|
ERROR
|
Following water quality calculations a NaN was detected in cell <2d_cell_id>, layer <layer_id>, wq constituent <wq_constituent>.
|
TUFLOW FV, TUFLOW FV - WQ
|
|
13000
|
ERROR
|
PTM control file must first be read in order to activate module.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13001
|
ERROR
|
Particle seed location is outside model domain
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13002
|
WARNING
|
Particle/s have been seeded outside model domain. Check coordinates in seed particle specifications.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13003
|
ERROR
|
Projected file size exceeds current limit.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13004
|
ERROR
|
Unknown output parameter type ’<output_parameter>
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13005
|
ERROR
|
Unknown output type, “<output_type>”.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13006
|
ERROR
|
Unrecognised seed particle type
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13007
|
WARNING
|
<lost_particles_count> particles could not be tracked.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13008
|
ERROR
|
Error reading input file
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13009
|
ERROR
|
Horizontal dispersion model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13010
|
ERROR
|
Motility model (<motility_model>) parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13011
|
ERROR
|
Velocity profile model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13012
|
ERROR
|
Vertical dispersion model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13013
|
ERROR
|
Wave drift model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13014
|
ERROR
|
Wind drift model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13015
|
ERROR
|
decay model parameters have not been properly defined.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13016
|
WARNING
|
Number of conserved variables in restart file does not match current model configuration
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13017
|
ERROR
|
Restart file incompatible with number of particle groups
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13018
|
ERROR
|
Total particle allocation exceeds current limit.
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13019
|
ERROR
|
Requested upper limit exceeds particle group allocation. Group id = <particle_group_id>
|
TUFLOW FV, TUFLOW FV - PTM
|
|
13020
|
ERROR
|
Particle initialisation range is outside allocated bounds. Contact support@tuflow.com
|
TUFLOW FV, TUFLOW FV - PTM
|
|
90000
|
ERROR
|
Severity <requested_severity> is not allowed for message <message_code>. Using default severity.
|
TUFLOW FV
|
|
90001
|
ERROR
|
Both x and y arguments are required when either is passed to raise, but only <argument_name> was provided.
|
TUFLOW FV
|