Section 11 Outputs

Prior to carrying out a simulation the desired output needs to be configured and customised. For viewing outputs, see Chapter 15. There are also a variety of post-processing utilities available, see Chapter 17.

The chapter includes discussion on:

• Setting the folder location of where outputs are written (Section 11.1).
• Configuring map output options including 1D results in a 2D form and the powerful output zones feature (Section 11.2).
• Options for setting up time-series output from 1D and 2D domains at specified locations (Section 11.3).
• Specialised outputs such as time and depth of inundation along evacuation routes (Section 11.4).
• Options for customising the check and log file outputs (Section 11.5).
• List of commands available for customising all the different output options, including output to the simulation console window, check files and folder locations (Section 11.6).

11 Outputs

  11.1 Output Location

  11.2 Map Outputs

    11.2.1 Output Time Controls

    11.2.2 Map Output Formats

      11.2.2.1 Mesh Based Formats

        11.2.2.1.1 Mesh Configurations

      11.2.2.2 Grid Based Formats

      11.2.2.3 High-Resolution Grids

      11.2.2.4 Combined Format

      11.2.2.5 GIS Based Format

    11.2.3 Map Output Data Types

      11.2.3.1 Hazard Data Types

    11.2.4 1D Map Outputs

      11.2.4.1 Water Level Lines

      11.2.4.2 Water Level Line Points

      11.2.4.3 Adding Triangles into the 1d_WLL Layer

    11.2.5 Output Zones

    11.2.6 Gauge Level Output

  11.3 Time-Series Outputs

    11.3.1 1D Time-Series Output

    11.3.2 2D Time-Series Output

      11.3.2.1 Plot Output

      11.3.2.2 Long Profile Output

    11.3.3 Reporting Locations

    11.3.4 Structure Output

  11.4 Specialised Outputs

    11.4.1 Receptors

    11.4.2 Evacuation Routes

  11.5 Check and Log Files

  11.6 Output Control Commands