References

Ansar M. and Nair S. (2003). Flow Computations at STA-1 West Gated Spillways. South Florida Water Management District.

Australian Emergency Management Institute. (2014). Australian Emergency Management Handbook 7: Managing Floodplain Best Practice in Flood Risk Management in Australia. https://knowledge.aidr.org.au/media/3521/adr-handbook-7.pdf

Austroads. (1994). Waterway Design - a Guide to the Hydraulic Design of Bridges, Culverts and Floodways. https://austroads.com.au/

Austroads. (2018). Guide to Bridge Technology Part 8, Hydraulic Design of Waterway Structures. https://austroads.com.au/

Babister, M., & Barton, C. (2012). Two Dimensional Modelling in Urban and Rural Floodplains Stage 1 & 2 Report. https://arr.ga.gov.au/__data/assets/pdf_file/0019/40573/ARR_Project15_TwoDimensional_Modelling_DraftReport.pdf

Barton, C. (2001). Flow Through an Abrupt Constriction – 2D Hydrodynamic Model Performance and Influence of Spatial Resolution (C. Barton, Ed.) [M.Eng.Sc Master Thesis]. https://tuflow.com/media/4983/2001-flow-through-an-abrupt-constriction-2d-hydrodynamic-performance-and-influence-of-spatial-resolution-barton-thesis.pdf

Benham, S., & Rogencamp, G. (2003). Appliction of 2D Flood Models with 1D Drainage Elements. NSW FMA Conference. ?

Bos, M. (1976). Discharge Measurement Structures (Publication No. 161). Delft Hydraulic Laboratory. https://www.samsamwater.com/library/pub20.pdf

Bos, M. (1989). Discharge Measurement Structures (3rd revised edition.). International Institute for Land Reclamation; Improvement. https://www.samsamwater.com/library/pub20.pdf

Boyte, C. (2014). The Application of Direct Rainfall Models as Hydrologic Models Incorporating Hydraulic Resistance at Shallow Depths [B.Eng Thesis]. https://tuflow.com/media/5009/2014-the-application-of-direct-rainfall-models-as-hydrologic-models-incorporating-hydraulic-resistance-at-shallow-depths-boyte-thesis.pdf

Bradley, J. (1978). Hydraulics of Bridge Waterways (HDS 1, FIWA). Bridge Division. https://www.fhwa.dot.gov/engineering/hydraulics/pubs/hds1.pdf

CIWEM. (2009). Integrated Urban Drainage Modelling Guide. CIWEM.

Collecutt, G., Baeumer, U., Gao, S., & Syme, W. (2022). Bridge Deck Afflux Modelling – Benchmarking of CFD and SWE Codes to Real-World Data. Hydrology & Water Resources Symposium. https://tuflow.com/media/7554/2022-bridge-deck-afflux-modelling-benchmarking-of-cfd-and-swe-codes-to-real-world-data-collecutt-et-al-hwrs.pdf

Collecutt, G., Gao, S., & Syme, W. (2020). Mesh-Size Insensitive Turbulence Modelling for the 2D Shallow Water Equations. River Flow 2020, pp. 1–9. https://tuflow.com/media/5023/2020-mesh-size-insensitive-turbulence-modelling-for-the-2d-shallow-water-equations-collecutt-et-al-iahr-river-flow-delft.pdf

Collecutt, G., & Syme, B. (2017). Experimental Benchmarking of Mesh Size and Time-Step Convergence for a 1st and 2nd Order SWE Finite Volume Scheme. Proceedings of the 37th IAHR World Congress. https://www.tuflow.com/Download/Publications/07-31-1369.pdf

Cox, R., Shard, T., & Blacka, M. (2010). Australian Rainfall and Runoff Revision Project 10: Appropriate Safety Criteria for People. Austalian Institute of Engineers. https://arr.ga.gov.au/__data/assets/pdf_file/0006/40578/ARR_Project_10_Stage1_report_Final.pdf

CSIRO. (2000). Floodplain Management in Australia Best Practice Principles and Guidelines. CSIRO Publishing.

DEFRA. (2006a). DEFRA r&d Outputs: Flood Risks to People Phase Two Draft FD2321/TR1 and TR2. DEFRA. https://assets.publishing.service.gov.uk/media/602bbc3de90e07055f646148/Flood_risks_to_people_-_Phase_2_Guidance_Document_Technical_report.pdf

DEFRA. (2006b). Flood Risks to People Phase 2 FD2321/TR1 the Flood Risks to People Methodology. DEFRA. https://assets.publishing.service.gov.uk/media/602bbc768fa8f50383c41f80/Flood_risks_to_people_-_Phase_2_The_flood_risks_to_people_methodology_technical_report.pdf

DHI. (2009). MOUSE PIPE FLOW – Reference Manual. Danish Hydraulic Institute. https://manuals.mikepoweredbydhi.help/2017/Cities/MOUSEPipeFlowReference.pdf

Environment Agency. (2004). Tidal Thames Embayment Inundation Study. EA, Halcrow, TUFLOW.

Environment Agency. (2006). UK FD2321 Technical Report - Flood Risks to People: Phase 2 Project Record. UK Government; https://assets.publishing.service.gov.uk/media/602bbb768fa8f50386a7f8aa/Flood_risks_to_people_-_Phase_2_Project_Record.pdf.

Environment Agency. (2008). Explanatory Note for FD2320 and FD2321 Project Record. https://assets.publishing.service.gov.uk/media/602bbdcfe90e070561b31432/Explanatory_note_for_FD2320_and_FD2321_project_record.pdf.

Environment Agency. (2010). The Fluvial Design Guide. Environment Agency.

Falconer, R. A., Lin, B., & Kashefipour, S. M. (2005). Modelling Water Quality Processes in Estuaries. In P. B. Bates, S. N. Lane, & R. I. Furguson (Eds.), Computational fluid dynamics: Applications in environmental hydraulics. John Wiley; Sons.

Gao, S., Ryan, P., Syme, W., & Collecutt, G. (2022). The End of the 1D Open Channel Cross-Section? Hydrology & Water Resources Symposium. https://tuflow.com/media/7547/2022-the-end-of-the-1d-open-channel-cross-section-gao-et-al-hwrs.pdf

GHD. (2011). MBRC Storm Tide Management Study: Stage 1 – Scoping Report.

Hamilton City Council. (2012). Flood Mapping. https://hamilton.govt.nz/property-rates-and-building/district-plan/flood-mapping/.

Henderson, F. (1966). Open Channel Flow. Macmillan.

Holland, G. J. (1980). An Analytic Model of the Wind and Pressure Profiles in Hurricanes. Monthly Weather Review, 108(8), 1212–1218. https://doi.org/10.1175/1520-0493(1980)108<1212:AAMOTW>2.0.CO;2

HR Wallingford. (1988). Afflux at Arch Bridges. https://eprints.hrwallingford.com/219/1/SR182-Afflux-arch-bridges-HRWallingford.pdf

Huxley, C. (2004). TUFLOW Testing and Validation (B. ENG. Christopher Dylan Huxley, Ed.) [Thesis]. https://www.tuflow.com/Download/Publications/TUFLOW%20Validation%20and%20Testing,%20Huxley,%202004.pdf

Huxley, C., Syme, W., Ryan, P., & Collecutt, G. (2022). Hydraulic Modelling 2D Cell Size Result Convergence – Comparing the Performance of Different Shallow Water Equation Solution Schemes. Hydrology and Water Resources Symposium, Engineers Australia. https://www.tuflow.com/media/7555/2022-hydraulic-modelling-2d-cell-size-result-convergence-huxley-et-al-hwrs.pdf

Kitts, D., Syme, W., Gao, S., Collecutt, G., & Ryan, P. (2020). Mesh Orientation and Cell Size Sensitivity in 2D SWE Solvers. IAHR River Flow Conference. https://tuflow.com/media/5022/2020-mesh-orientation-and-cell-size-sensitivity-in-2d-swe-solvers-kitts-et-al-iahr-river-flow-delft.pdf

Leonard, B. P. (1991). The ULTIMATE Conservative Difference Scheme Applied to Unsteady One-Dimensional Advection. Computer Methods in Applied Mechanics and Engineering, 88(1), 17–74.

Leonard, B. P., MacVean, M. K., & Lock, A. P. (1993). Positivity-Preserving Numerical Schemes for Multidimensional Advection (No. 93N27091). NASA Centre for Aerospace Information.

Leonard, B. P., & Niknafs, H. S. (1991). Cost-Effective Accurate Coarse-Grid Method for Highly Convective Multidimensional Unsteady Flows (No. 91N21075). NASA Centre for Aerospace Information.

McDonnell, B., Wu, J. X., Ratliff, K., Mullapudi, A., & Tryby, M. (2021). Open Water Analytics Stormwater Management Model (Version 5.1.13). Zenodo. https://doi.org/10.5281/zenodo.5484299

Melbourne Water. (2016). Flood Mapping Projects Guidelines and Technical Specifications (Version 1).

Miller, D. (1994). Discharge Characteristics IAHR Hydraulic Structures Design Manual (No. No.8; pp. 249 pages). Hydraulic Design Considerations, Balkema Publ.

Morrison, W., & Smith, P. (1978). A Practical Application of a Network Model Numerical Simulation of Fluid Motion. North Holland Publishing Company.

Neelz, S., & Pender, G. (2013). Benchmarking the Latest Generation of 2D Hydaulic Modeling Packages. Environment Agency. https://doi.org/SC120002/R

NSW Goverment. (2005a). Floodplain Development Manual: The Management of Flood Liable Land (pp. 149 pages). Department of Infrastructure, Planning; Natural Resources (NSW Government). https://www.environment.nsw.gov.au/-/media/OEH/Corporate-Site/Documents/Water/Floodplains/floodplain-development-manual.pdf

NSW Goverment. (2005b). Floodplain Management Manual. NSW Department of Land; Water Conservation (NSW Government).

Ollett, P., & Syme, B. (2016). ARR blockage: Numerical implementation and three case studies. http://www.hydralinc.com/wp-content/uploads/Ollett-Syme-2016-ARR-Blockage.pdf

Port Macquarie-Hastings Council. (2018). PORT MACQUARIE-HASTINGS COUNCIL FLOOD POLICY. https://www.pmhc.nsw.gov.au/files/assets/public/v/1/document-files/your-council/publications/policies/port-macquarie-hastings-council-flood-adopted-2018-12-12.pdf.

Queensland Government. (2001). Queensland Climate Change and Community Vulnerability to Tropical Cyclones - Ocean Hazrds Assessment. https://www.systemsengineeringaustralia.com.au/download/Ocean_Hazards_Assess_Stage1A_revised.pdf

Queensland Reconstruction Authority. (2012). Planning for Stronger, More Resilient Fl Oodplains: Part 2. https://www.qra.qld.gov.au/sites/default/files/2018-10/resilient-floodplains-part2-full_0.pdf.

Rawls, W., Brakesiek, J., & Miller, N. (1983). Green-Ampt Infiltration Parameters from Soils Data. Journal of Hydraulic Engineering, vol 109, 62–71.

Ryan, P., Syme, W., Gao, S., & Collecutt, G. (2022). Irect Rainfall Hydraulic Model Validation. Hydrology & Water Resources Symposium. https://www.tuflow.com/media/7545/2022-direct-rainfall-hydraulic-model-validation-ryan-et-al-hwrs.pdf

Stelling, G. (1984). On the Construction of Computational Methods for Shallow Water Flow Problems. Rijkswaterstaat Communications.

Syme, W. (1991). Dynamically Linked Two Dimensional / One-Dimensional Hydrodynamic Modelling Program for Rivers, Estuaries and Coastal Waters (W. Syme, Ed.) [M.Eng.Sc(100% Research) Thesis]. Dept of Civil Engineering. https://tuflow.com/media/4982/1991-tuflow-dynamically-linked-2d-and-1d-hydrodynamic-modelling-syme-thesis.pdf

Syme, W. (2001a). Modelling of Bends and Hydraulic Structures in a Two-Dimensional Scheme. The Institution of Engineers, Australia Conference on Hydraulics in Civil Engineering. https://tuflow.com/media/4984/2001-modelling-of-bends-and-hydraulic-structures-in-a-2d-scheme-syme.pdf

Syme, W. (2001b). TUFLOW – Two & One-Dimensional Unsteady FLOW Software for Rivers, Estuaries and Coastal Waters. The Institution of Engineers, Australia 2D Seminar. https://tuflow.com/media/4985/2001-tuflow-two-and-one-dimensional-unsteady-flow-software-for-rivers-estuaries-and-coastal-waters-syme.pdf

Syme, W. (2008). Flooding in Urban Areas - 2D Modelling Approaches for Buildings and Fences. Engineers Australia, 9th National COnference on Hydraulics in Water Enginnering. https://tuflow.com/media/4997/2008-flooding-in-urban-areas-2d-modelling-approaches-for-buildings-and-fences-syme-hwe-aus.pdf

Syme, W., Nielsen, C., & Charteris, A. (1998). Comparison of Two-Dimensional Hydrodynamic Modelling Systems Part One - Flow Through a Constriction. International Conference on Hydraulics in Civil Engineering.

TUFLOW. (2018). TUFLOW Classic/HPC User Manual Build 2018-03-AD. https://downloads.tuflow.com/TUFLOW/Releases/2018-03/TUFLOW%20Manual.2018-03-AD.pdf

TUFLOW. (2020). TUFLOW Classic and HPC 2020-01 and 2020-10 Release Notes. https://downloads.tuflow.com/TUFLOW/Releases/2020-10/TUFLOW%20Release%20Notes.2020-10-AF.pdf

Tullis, B., & Robinson, S. (2008). Quantifying Culvert Exit Loss. Journal of Irrigation and Drainage Engineering, Vol. 134(No. 2), pp. 263–266.

USACE. (1977). Hydraulic Design Criteria-Sheets 312. US Army Corp of Engineers. https://apps.dtic.mil/sti/tr/pdf/ADA092238.pdf

USACE. (1987). Hydraulic Design Criteria-Sheets 111-1 to 111-14. US Army Corp of Engineers. https://apps.dtic.mil/sti/tr/pdf/ADA092237.pdf

USBR. (1987). Design of Small Dams [Technology & Engineering]. U.S. Dept. of the Interior, Bureau of Reclamation, 1987-. https://www.usbr.gov/tsc/techreferences/mands/mands-pdfs/SmallDams.pdf

Weeks, W., Barthelmess, A., Rigby, E., Witheridge, G., & Adamson, R. (2009). Australian Rainfall and Runoff Revision Project 11: Blockage of Hydraulic Structures. Austalian Institute of Engineers. https://doi.org/P11/S1/007

Weeks, W., Witheridge, G., Rigby, E., Barthelmess, A., & O’Loughlin, G. (2013). Australian Rainfall and Runoff Revision Project 11: Blockage of Hydraulic Structures. Austalian Institute of Engineers. https://doi.org/P11/S2/021

Witheridge, G. (2009). Hydraulic Analysis of the Debris Blockage of Culvert Inlets. Catchments & Creek Pty Ltd.

Wu, J. (1980). Wind-Stress Coefficients over Sea Surface Near Neutral Conditions—a Revisit. Journal of Physical Oceanography, Vol. 10(5), pp. 727–740. https://doi.org/https://doi.org/10.1175/1520-0485(1980)010<0727:WSCOSS>2.0.CO;2

Wu, J. (1982). Wind-Stress Coefficients over Sea Surface from Breeze to Hurricane. Journal of Geophysical Research, Vol. 87(C12), pp. 9704–9706. https://doi.org/https://doi.org/10.1029/JC087iC12p09704

Wu, W., Shields Jr., F. D., Bennett, S. J., & Wang, S. S. Y. (2005). A Depth-Averaged Two-Dimensional Model for Flow, Sediment Transport, and Bed Topography in Curved Channels with Riparian Vegetation. Water Resources Research, 41(3). https://doi.org/https://doi.org/10.1029/2004WR003730

Wu, & Falconer, R. A. (2000). A Mass Conservative 3-d Numerical Model for Predicting Solute Fluxes in Estuarine Waters. Advances in Water Resources, 23(5), 531–543.