References

Ansar M. and Nair S. (2003). Flow Computations at STA-1 West Gated Spillways. South Florida Water Management District.

Australian Emergency Management Institute. (2017). Managing the Floodplain: A Guide to Best Practice in Flood Risk Management in Australia. Australian Institute for Disaster Resilience. https://knowledge.aidr.org.au/media/3518/adr-guideline-7-3.pdf

Austroads. (1994). Waterway Design - a Guide to the Hydraulic Design of Bridges, Culverts and Floodways. https://austroads.gov.au/

Austroads. (2018). Guide to Bridge Technology Part 8, Hydraulic Design of Waterway Structures. https://austroads.gov.au/

Babister, M., & Barton, C. (2012). Two Dimensional Modelling in Urban and Rural Floodplains Stage 1 & 2 Report. https://arr.ga.gov.au/arr-guideline/revision-projects/revision-project-reports/arr-supporting-documents/ARR_Project15_TwoDimensional_Modelling_DraftReport.pdf

Barton, C. (2001). Flow Through an Abrupt Constriction – 2D Hydrodynamic Model Performance and Influence of Spatial Resolution (C. Barton, Ed.) [M.Eng.Sc Master Thesis]. https://tuflow.com/media/4983/2001-flow-through-an-abrupt-constriction-2d-hydrodynamic-performance-and-influence-of-spatial-resolution-barton-thesis.pdf

Bos, M. (1989). Discharge Measurement Structures (3rd revised edition.). International Institute for Land Reclamation; Improvement. https://www.samsamwater.com/library/pub20.pdf

Boyte, C. (2014). The Application of Direct Rainfall Models as Hydrologic Models Incorporating Hydraulic Resistance at Shallow Depths [B.Eng Thesis]. https://tuflow.com/media/5009/2014-the-application-of-direct-rainfall-models-as-hydrologic-models-incorporating-hydraulic-resistance-at-shallow-depths-boyte-thesis.pdf

Bradley, J. (1978). Hydraulics of Bridge Waterways (HDS 1, FIWA). Bridge Division. https://www.fhwa.dot.gov/engineering/hydraulics/pubs/hds1.pdf

City of Gold Coast. (n.d.). Gold Coast City Plan. https://cityplan.goldcoast.qld.gov.au/eplan/rules/0/1403/0/39388/0/226.

CIWEM. (2009). Integrated Urban Drainage Modelling Guide. CIWEM.

Collecutt, G., Baeumer, U., Gao, S., & Syme, W. (2022). Bridge Deck Afflux Modelling – Benchmarking of CFD and SWE Codes to Real-World Data. Hydrology & Water Resources Symposium. https://tuflow.com/media/7554/2022-bridge-deck-afflux-modelling-benchmarking-of-cfd-and-swe-codes-to-real-world-data-collecutt-et-al-hwrs.pdf

Collecutt, G., Gao, S., & Syme, W. (2020). Mesh-Size Insensitive Turbulence Modelling for the 2D Shallow Water Equations. River Flow 2020, pp. 1–9. https://tuflow.com/media/5023/2020-mesh-size-insensitive-turbulence-modelling-for-the-2d-shallow-water-equations-collecutt-et-al-iahr-river-flow-delft.pdf

Collecutt, G., & Syme, B. (2017). Experimental Benchmarking of Mesh Size and Time-Step Convergence for a 1st and 2nd Order SWE Finite Volume Scheme. Proceedings of the 37th IAHR World Congress. https://downloads.tuflow.com/_archive/Publications/07-31-1369.pdf

Cox, R., Shard, T., & Blacka, M. (2010). Australian Rainfall and Runoff Revision Project 10: Appropriate Safety Criteria for People. Austalian Institute of Engineers. https://arr.ga.gov.au/arr-guideline/revision-projects/revision-project-reports/project-10-safety-criteria-for-people/ARR_Project_10_Stage1_report_Final.pdf

CSIRO. (2000). Floodplain Management in Australia Best Practice Principles and Guidelines. CSIRO Publishing.

DEFRA. (2006a). DEFRA r&d Outputs: Flood Risks to People Phase Two Draft FD2321/TR1 and TR2. DEFRA. https://assets.publishing.service.gov.uk/media/602bbc3de90e07055f646148/Flood_risks_to_people_-_Phase_2_Guidance_Document_Technical_report.pdf

DEFRA. (2006b). Flood Risks to People Phase 2 FD2321/TR1 the Flood Risks to People Methodology. DEFRA. https://assets.publishing.service.gov.uk/media/602bbc768fa8f50383c41f80/Flood_risks_to_people_-_Phase_2_The_flood_risks_to_people_methodology_technical_report.pdf

DHI. (2009). MOUSE PIPE FLOW – Reference Manual. Danish Hydraulic Institute. https://manuals.mikepoweredbydhi.help/2017/Cities/MOUSEPipeFlowReference.pdf

Environment Agency. (2006). UK FD2321 Technical Report - Flood Risks to People: Phase 2 Project Record. UK Government; https://assets.publishing.service.gov.uk/media/602bbb768fa8f50386a7f8aa/Flood_risks_to_people_-_Phase_2_Project_Record.pdf.

Environment Agency. (2008). Explanatory Note for FD2320 and FD2321 Project Record. https://assets.publishing.service.gov.uk/media/602bbdcfe90e070561b31432/Explanatory_note_for_FD2320_and_FD2321_project_record.pdf.

Environment Agency. (2010). The Fluvial Design Guide. Environment Agency.

Falconer, R. A., Lin, B., & Kashefipour, S. M. (2005). Modelling Water Quality Processes in Estuaries. In P. B. Bates, S. N. Lane, & R. I. Furguson (Eds.), Computational fluid dynamics: Applications in environmental hydraulics. John Wiley; Sons.

Fringer, O. B., Armfield, S. W., & Street, R. L. (2005). Reducing Numerical Diffusion in Interfacial Gravity Wave Simulations. International Journal for Numerical Methods in Fluids, 49, 301–329.

GHD. (2012). MBRC Storm Tide Management Study.

Hamilton City Council. (2012). Flood Mapping. https://hamilton.govt.nz/property-rates-and-building/district-plan/flood-mapping/.

Henderson, F. (1966). Open Channel Flow. Macmillan.

Holland, G. J. (1980). An Analytic Model of the Wind and Pressure Profiles in Hurricanes. Monthly Weather Review, 108(8), 1212–1218. https://doi.org/10.1175/1520-0493(1980)108<1212:AAMOTW>2.0.CO;2

HR Wallingford. (1988). Afflux at Arch Bridges. https://eprints.hrwallingford.com/219/1/SR182-Afflux-arch-bridges-HRWallingford.pdf

Huxley, C. (2004). TUFLOW Testing and Validation (B. ENG. Christopher Dylan Huxley, Ed.) [Thesis]. https://www.tuflow.com/media/4989/2004-tuflow-testing-and-validation-huxley.pdf

Huxley, C., Syme, W., Ryan, P., & Collecutt, G. (2022). Hydraulic Modelling 2D Cell Size Result Convergence – Comparing the Performance of Different Shallow Water Equation Solution Schemes. Hydrology and Water Resources Symposium, Engineers Australia. https://www.tuflow.com/media/7555/2022-hydraulic-modelling-2d-cell-size-result-convergence-huxley-et-al-hwrs.pdf

Kitts, D., Syme, W., Gao, S., Collecutt, G., & Ryan, P. (2020). Mesh Orientation and Cell Size Sensitivity in 2D SWE Solvers. IAHR River Flow Conference. https://tuflow.com/media/5022/2020-mesh-orientation-and-cell-size-sensitivity-in-2d-swe-solvers-kitts-et-al-iahr-river-flow-delft.pdf

Leonard, B. P. (1991). The ULTIMATE Conservative Difference Scheme Applied to Unsteady One-Dimensional Advection. Computer Methods in Applied Mechanics and Engineering, 88(1), 17–74.

Leonard, B. P., MacVean, M. K., & Lock, A. P. (1993). Positivity-Preserving Numerical Schemes for Multidimensional Advection (93N27091). NASA Centre for Aerospace Information.

Leonard, B. P., & Niknafs, H. S. (1991). Cost-Effective Accurate Coarse-Grid Method for Highly Convective Multidimensional Unsteady Flows (91N21075). NASA Centre for Aerospace Information.

MBRC. (2015). Flood and Coastal Hazard Evaluation Report. Moreton Bay Regional Council. https://www.moretonbay.qld.gov.au/files/assets/public/v/1/services/building-development/mbrc-plan/background-studies/flood-and-coastal-hazard-evaluation-report-june-2015.pdf

McDonnell, B., Wu, J. X., Ratliff, K., Mullapudi, A., & Tryby, M. (2021). Open Water Analytics Stormwater Management Model (5.1.13). Zenodo. https://doi.org/10.5281/zenodo.5484299

Melbourne Water. (2016). Flood Mapping Projects Guidelines and Technical Specifications (Version 1).

Miller, D. (1994). Discharge Characteristics IAHR Hydraulic Structures Design Manual (No.8; pp. 249 pages). Hydraulic Design Considerations, Balkema Publ.

Morrison, W., & Smith, P. (1978). A Practical Application of a Network Model Numerical Simulation of Fluid Motion. North Holland Publishing Company.

Neelz, S., & Pender, G. (2013). Benchmarking the Latest Generation of 2D Hydaulic Modeling Packages. Environment Agency. https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/290884/scho0510bsno-e-e.pdf

NSW Goverment. (2005). Floodplain Management Manual. NSW Department of Land; Water Conservation (NSW Government).

Ollett, P., & Syme, B. (2016). ARR blockage: Numerical implementation and three case studies. http://www.hydralinc.com/wp-content/uploads/Ollett-Syme-2016-ARR-Blockage.pdf

Port Macquarie-Hastings Council. (2018). PORT MACQUARIE-HASTINGS COUNCIL FLOOD POLICY. https://www.pmhc.nsw.gov.au/files/assets/public/v/1/document-files/your-council/publications/policies/port-macquarie-hastings-council-flood-adopted-2018-12-12.pdf.

Queensland Government. (2001). Queensland Climate Change and Community Vulnerability to Tropical Cyclones - Ocean Hazrds Assessment. https://www.systemsengineeringaustralia.com.au/download/Ocean_Hazards_Assess_Stage1A_revised.pdf

Queensland Reconstruction Authority. (2012). Planning for Stronger, More Resilient Fl Oodplains: Part 2. https://www.qra.qld.gov.au/sites/default/files/2018-10/resilient-floodplains-part2-full_0.pdf.

Roger Kilgore and A. Tamim Atayee and George Herrmann. (2024). Urban Drainage Design Manual (4th Edition) (pp. 311 pages). U.S. Department of Transportation Federal Highway Administration. https://www.fhwa.dot.gov/engineering/hydraulics/pubs/hif24006.pdf

Ryan, P., Syme, W., Gao, S., & Collecutt, G. (2022). Irect Rainfall Hydraulic Model Validation. Hydrology & Water Resources Symposium. https://www.tuflow.com/media/7545/2022-direct-rainfall-hydraulic-model-validation-ryan-et-al-hwrs.pdf

Schaap, M. G. (2002). Rosetta: A Computer Program for Estimating Soil Hydraulic Parameters with Hierarchical Pedotransfer Functions. University of Arizona. https://cales.arizona.edu/research/rosetta/download/rosetta.pdf

Stelling, G. (1984). On the Construction of Computational Methods for Shallow Water Flow Problems. Rijkswaterstaat Communications.

Syme, W. (1991). Dynamically Linked Two Dimensional / One-Dimensional Hydrodynamic Modelling Program for Rivers, Estuaries and Coastal Waters (W. Syme, Ed.) [M.Eng.Sc(100% Research) Thesis]. Dept of Civil Engineering. https://tuflow.com/media/4982/1991-tuflow-dynamically-linked-2d-and-1d-hydrodynamic-modelling-syme-thesis.pdf

Syme, W. (2001a). Modelling of Bends and Hydraulic Structures in a Two-Dimensional Scheme. The Institution of Engineers, Australia Conference on Hydraulics in Civil Engineering. https://tuflow.com/media/4984/2001-modelling-of-bends-and-hydraulic-structures-in-a-2d-scheme-syme.pdf

Syme, W. (2001b). TUFLOW – Two & One-Dimensional Unsteady FLOW Software for Rivers, Estuaries and Coastal Waters. The Institution of Engineers, Australia 2D Seminar. https://tuflow.com/media/4985/2001-tuflow-two-and-one-dimensional-unsteady-flow-software-for-rivers-estuaries-and-coastal-waters-syme.pdf

Syme, W. (2008). Flooding in Urban Areas - 2D Modelling Approaches for Buildings and Fences. Engineers Australia, 9th National COnference on Hydraulics in Water Enginnering. https://tuflow.com/media/4997/2008-flooding-in-urban-areas-2d-modelling-approaches-for-buildings-and-fences-syme-hwe-aus.pdf

Syme, W., Nielsen, C., & Charteris, A. (1998). Comparison of Two-Dimensional Hydrodynamic Modelling Systems Part One - Flow Through a Constriction. International Conference on Hydraulics in Civil Engineering.

TMR. (2024). Road Planning and Design Manual, Edition 2, Volume 3. Queensland Department of Transport; Main Roads. https://www.tmr.qld.gov.au/business-industry/technical-standards-publications/road-planning-and-design-manual-2nd-edition

Tullis, B., & Robinson, S. (2008). Quantifying Culvert Exit Loss. Journal of Irrigation and Drainage Engineering, Vol. 134(No. 2), pp. 263–266.

USACE. (1977). Hydraulic Design Criteria-Sheets 312. US Army Corp of Engineers. https://apps.dtic.mil/sti/tr/pdf/ADA092238.pdf

USBR. (1987). Design of Small Dams [Technology & Engineering]. U.S. Dept. of the Interior, Bureau of Reclamation, 1987-. https://www.usbr.gov/tsc/techreferences/mands/mands-pdfs/SmallDams.pdf

USDA. (1986). Urban Hydrology for Small Watersheds Technical Release 55 (TR-55). https://nationalstormwater.com/wp-content/uploads/2020/07/Urban-Hydrology-for-Small-Watersheds-TR-55.pdf

Van Genuchten, M. Th. (1980). A Closed-Form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils. Soil Science Society of America Journal, 44(5), 892–898.

Weeks, W., Witheridge, G., Rigby, E., Barthelmess, A., & O’Loughlin, G. (2013). Australian Rainfall and Runoff Revision Project 11: Blockage of Hydraulic Structures. Austalian Institute of Engineers. https://arr.ga.gov.au/arr-guideline/revision-projects/project-list/projects/project-11/downloads/ARR_Project_11_Stage2_report_Final.pdf

Wu, J. (1980). Wind-Stress Coefficients over Sea Surface Near Neutral Conditions—a Revisit. Journal of Physical Oceanography, Vol. 10(5), pp. 727–740. https://doi.org/10.1175/1520-0485(1980)010<0727:WSCOSS>2.0.CO;2

Wu, J. (1982). Wind-Stress Coefficients over Sea Surface from Breeze to Hurricane. Journal of Geophysical Research, Vol. 87(C12), pp. 9704–9706. https://doi.org/https://doi.org/10.1029/JC087iC12p09704

Wu, W., Shields Jr., F. D., Bennett, S. J., & Wang, S. S. Y. (2005). A Depth-Averaged Two-Dimensional Model for Flow, Sediment Transport, and Bed Topography in Curved Channels with Riparian Vegetation. Water Resources Research, 41(3). https://doi.org/10.1029/2004WR003730

Wu, & Falconer, R. A. (2000). A Mass Conservative 3-d Numerical Model for Predicting Solute Fluxes in Estuarine Waters. Advances in Water Resources, 23(5), 531–543.